Quantcast
Channel: Electronic Kits, Components, and Accessories - BC Robotics
Browsing all 48 articles
Browse latest View live

Comment on Premium Female/Male Jumper Wires – 40 x 6″ by Luke

Do these cables come as double female ends or male-female ends? It is difficult to tell.

View Article



Comment on Premium Female/Male Jumper Wires – 40 x 6″ by Chris @ BCR

This specific cable is male on one end and female on the other double female can be found here: http://www.bc-robotics.com/shop/premium-femalefemale-jumper-wires-40-x-6/ and double male can be found...

View Article

Comment on 3 Pack – SMT Breakout PCB – 48QFN / 48TQFP by Len Ralph

What does “breakout” mean?

View Article

Comment on 3 Pack – SMT Breakout PCB – 48QFN / 48TQFP by Front Desk @ BCR

Hi Len, Breakout is short for “breakout board” – which is a circuit board designed to break out all of the pins from a small integrated circuit to something a little more workable. With electronic...

View Article

Polymorph – 250g

Description Polymorph is a non-toxic, biodegradable polyester with a low melting temperature of about 60°C (140°F). Prototype plastic parts can be made by simply heating the plastic beads in hot water...

View Article


Servo Extension Cable 6″ Female – Female

Description This 6-inch (150-mm), servo extension cable has 22-AWG wires and female “JR”-style connectors on both ends, the same kind of connector commonly found on RC hobby servos. It can be used to...

View Article

Servo Extension Cable 12″ Female – Female

Description This 12-inch (300-mm), servo extension cable has 22-AWG wires and female “JR”-style connectors on both ends, the same kind of connector commonly found on RC hobby servos. It can be used to...

View Article

Copper Tape – 6mm x 15M

Description Copper tape can be an interesting addition to your toolbox. The tape itself is made of thin pure copper so it’s extremely flexible and can take on nearly any shape. You can easily solder...

View Article


5050 LED breakout PCB – 10 pack

Description Need to prototype with a SMT chip? Each side of this 5050 LED SMT Breakout PCB has a 5050 LED pad with traces going to two rows of 0.1″ spaced holes. Solder your LED to either side and...

View Article


1591L Proto Board

Description This small perfboard is specifically designed to fit our small black enclosure. The 4 mounting holes in each corner make this a perfect fit for the box and the combination make a great...

View Article

6 Pack – SMT Breakout PCB – SOIC-14 or TSSOP-14

Description Need to prototype with a SMT chip? One side of this SMT breakout PCB has a 14-TSSOP pin out with traces going to two rows of 0.1″ spaced holes, the other has 14-SOIC. Solder your chip to...

View Article

3 Pack – SMT Breakout PCB – 48QFN / 48TQFP

Description Need to prototype with a SMT chip? One side of this SMT breakout PCB has a 48-TQFPP pin out with traces going to two rows of 0.1″ spaced holes, the other has 48-QFN. Solder your chip to...

View Article

Prototype Board – 8 x 12 cm

Description Take your project from the solderless breadboard to something a little more permanent! This prototype board is 120 x 80mm and uses a standard 2.54mm / 0.100″ spacing. The grid is 30 x 42...

View Article


Copper Tape – 5mm x 15m

Description Copper tape has countless applications in electronics from creating low-profile traces for electrical components to RF-shielding and antenna-making. Copper tape is even used to join things...

View Article

1591B Proto Board

Description This medium sized perfboard is specifically designed to fit Hammond 1591B flanged enclosures. The 4 mounting holes in each corner make this a perfect fit for the box and the combination...

View Article


Adjustable Parts Box

Description This is a small, adjustable part box for components, breakouts and development boards. Made from a clear polypropylene with reliable locking tabs, this box is incredibly durable and...

View Article

4 Pin F/F Jumper Cable

Description Since not every board has the same standardized pinout, and repining cables can be a pain, we have found these cable assemblies quite useful. One end of the cable features a solid 4 pin...

View Article


3 Pin F/F Jumper Cable

Description Since not every board has the same standardized pinout, and repining cables can be a pain, we have found these cable assemblies quite useful. One end of the cable features a solid 3 pin...

View Article

2 Pin F/F Jumper Cable

Description Since not every board has the same standardized pinout, and repining cables can be a pain, we have found these cable assemblies quite useful. One end of the cable features a solid 2 pin...

View Article

Multi Compartment Carrying Case

Description Organized storage is a great thing to have! These cases are the same ones found in a variety of Inventors Kits from SparkFun and work great for general storage. The case is double sided...

View Article
Browsing all 48 articles
Browse latest View live




Latest Images